Hollow metal window frame

CURRIES Tech Data Fire Rated Section Revised

or hollow metal mullion can be labeled to the same capabilities as two (2) single doors (check with Authority Having Jurisdiction (AHJ) prior to using this capability to verify acceptance) . Astragals, when required for fire protection, must be a steel overlapping design in accordance with our procedures . Split Astragals and Meeting

November 9th,2019

HOLLOW METAL DOOR/WINDOW SYSTEM FOR …

Frame Construction: the door and window frames are to be of standard hollow metal (drywall) design, consisting of jamb and head members for doors, and jamb, head and sill members for windows. The standard frame depth is either 5 3 / 4 ” or 8 3 / 4 ”, depending upon the wall panel thickness.

https://www.metlspan.com/wp-content/uploads/2019/09/HollowMetalDoorWindowTechBullfinalJul081_NA100115.pdf

November 9th,2019

Rough Opening Guide for Knockdown Drywall Frames

Rough Opening Guide for Knockdown Drywall Frames ** Overall Frame Size -2" on Width, -1" Height Varying face dimensions will not change rough opening sizes in …

http://www.hmfexpress.com/files/pdfs/Rough%20Opening%20Guide%20-%20KD.pdf

November 9th,2019

GUIDE SPECIFICATION FOR HOLLOW METAL DOORS AND …

B. Hollow metal panels, fixed or removable, [flush] or [rabbeted bottom edge], [glass moldings and stops], similar in construction to hollow metal doors. C. Hollow metal frame products, including [glass moldings and stops] [louvers] [louver inserts] [hollow metal panels] [in-fill panels] [other] as shown in the approved submittal drawings.

http://www.naamm.org/content/documents/HMMA_860-XX_Final_First_Ballot.pdf

November 9th,2019

SECTION 081113 - HOLLOW METAL DOORS AND FRAMES

A. Deliver hollow metal work palletized, wrapped, or crated to provide protection during transit and Project site storage. Do not use non-vented plastic. B. Deliver welded frames with two removable spreader bars across bottom of frames, tack welded to jambs and mullions. …

https://www.secmet.com/Other/Security%20Metal%20Products/documents/Hollow%20Metal%20Info/Hollow%20Metal%20Specifications.pdf

November 9th,2019

CURRIES Tech Data Fire Rated Section Revised

or hollow metal mullion can be labeled to the same capabilities as two (2) single doors (check with Authority Having Jurisdiction (AHJ) prior to using this capability to verify acceptance) . Astragals, when required for fire protection, must be a steel overlapping design in accordance with our procedures . Split Astragals and Meeting

https://www.curries.com/Other/Curries/Documents/tech%20open/sections/Tech%20Manual%20(Fire%20Rated).pdf

November 9th,2019

Steel Door Institute

• Hollow metal doors are excellent at limiting the danger and damage of fires. They are the only material widely available with a 3 hour rating. • For more detailed information on fire rated doors and frames, reference SDI 118 (Basic Fire Door, Fire Door Frame, Transom/Sidelight Frame, and Window Frame …

https://www.steeldoor.org/res/Fire%20Rated%20Doors%20and%20Frames%20Overview.pdf

November 9th,2019

FIRE RATED DOOR AND FRAME GENERAL REQUIREMENTS - …

FIRE RATED DOOR AND FRAME . GENERAL REQUIREMENTS . These requirements apply to all fire rated doors, frames, and windows. ... or window frames. 1-1/4" minimum at all transom frames and at members surrounding door openings in sidelight frames. Mullions 5/8" min 5/8" min

https://www.dcihollowmetal.com/pdf/TECH%20DATA%20SHEETS/frames/TDS-FireRating.pdf

November 9th,2019

Installation Recommendations HM Windows, Transoms ...

Steel Door + Window Systems ©2010 Stiles Custom Metal, Inc. 0710 1 Installation Recommendations Hollow Metal Windows, Transoms & Sidelites 1. Hollow metal window, transom, and sidelite systems are an excellent choice at exterior locations. Proper application of sealants commonly used with other window systems will result in excellent performance.

https://stilesdoors.com/techdata/pdf/Installation%20Recommendations%20HM%20Windows,%20Transoms%20&%20Sidelites%200710.pdf

November 9th,2019

HOLLOW MANUAL METAL NAAMM STANDARD HMMA 810

Hollow Metal Doors and Frames. TYPES OF CONSTRUCTION The four basic types of construction for hollow metal swing doors are illustrated and identified below. The type usually specified in commercial work is the continuously welded edge seam construction, Type A, and it is this type which is the basis of NAAMM Standard HMMA 861.

https://www.dcihollowmetal.com/pdf/HMMA_TechDoc/HMMA810_87.pdf